Linkedin Facebook-f
COATGUARD 624

COATGUARD 624

100% SOLVENT LESS EPOXY PAINT

COATGUARD 624 is a two-component, 100% solvent-less epoxy coating formulated for environments that demand high durability with low environmental impact. With zero solvent evaporation and extremely low VOC, this coating is ideal for indoor applications, confined spaces, and sensitive industrial zones. It creates a tough, chemical-resistant barrier on both concrete and steel substrates.

Product Overview

COATGUARD 624 provides a high-build, seamless, and low-odor protective layer designed to meet modern environmental and performance standards.

Key Features and Benefits:

  • 100% Solvent Less & Low VOC: Compliant with green building requirements and safe for enclosed areas.

  • High Film Thickness in One Coat: Reduces application time while providing maximum protection.

  • Excellent Adhesion: Bonds tightly to epoxy primers and midcoats for long-term performance.

  • Chemical and Abrasion Resistance: Ideal for industrial flooring, tanks, and containment areas.

  • Non-Toxic When Cured: Suitable for food processing, pharmaceutical, and cleanroom environments.

  • Odor-Free Application: Great for sensitive indoor facilities or low-ventilation areas.

Technical Data

SOON

Application Guide

Surface Preparation:

  • Flooring: Ensure midcoat (Coatguard 114) is fully cured, sanded with #100 grit, and vacuumed to remove dust and debris.

  • Tank Lining: Confirm that primer (Coatguard 110) is dry, clean, and dust-free.

Mixing Instructions:

  • Mix Part A and Part B thoroughly in a 2:1 ratio (or per manufacturer’s specification).

  • Stir until homogeneous using a mechanical stirrer.

  • No thinning required due to solvent-less formulation.

  • Pot life and working time may vary with temperature—apply immediately after mixing.

Application Method:

  • Apply using lint-free roller, natural bristle brush, or airless spray.

  • Apply 2 coats, allowing at least 4 hours recoat interval at 25–30°C.

  • Avoid overlapping or excessive rolling to minimize lap marks and ensure an even finish.

Additional Notes:

  • Ensure all application tools are clean and free of contaminants before use.

  • Maintain proper environmental conditions (temperature and humidity) during application and curing.

  • Clean tools immediately after use with the recommended epoxy cleaner.

System Use

SOON

Related products

Product Overview

COATGUARD 624 provides a high-build, seamless, and low-odor protective layer designed to meet modern environmental and performance standards.

Key Features and Benefits:

  • 100% Solvent Less & Low VOC: Compliant with green building requirements and safe for enclosed areas.

  • High Film Thickness in One Coat: Reduces application time while providing maximum protection.

  • Excellent Adhesion: Bonds tightly to epoxy primers and midcoats for long-term performance.

  • Chemical and Abrasion Resistance: Ideal for industrial flooring, tanks, and containment areas.

  • Non-Toxic When Cured: Suitable for food processing, pharmaceutical, and cleanroom environments.

  • Odor-Free Application: Great for sensitive indoor facilities or low-ventilation areas.

Technical Data

SOON

Application Guide

Surface Preparation:

  • Flooring: Ensure midcoat (Coatguard 114) is fully cured, sanded with #100 grit, and vacuumed to remove dust and debris.

  • Tank Lining: Confirm that primer (Coatguard 110) is dry, clean, and dust-free.

Mixing Instructions:

  • Mix Part A and Part B thoroughly in a 2:1 ratio (or per manufacturer’s specification).

  • Stir until homogeneous using a mechanical stirrer.

  • No thinning required due to solvent-less formulation.

  • Pot life and working time may vary with temperature—apply immediately after mixing.

Application Method:

  • Apply using lint-free roller, natural bristle brush, or airless spray.

  • Apply 2 coats, allowing at least 4 hours recoat interval at 25–30°C.

  • Avoid overlapping or excessive rolling to minimize lap marks and ensure an even finish.

Additional Notes:

  • Ensure all application tools are clean and free of contaminants before use.

  • Maintain proper environmental conditions (temperature and humidity) during application and curing.

  • Clean tools immediately after use with the recommended epoxy cleaner.

System Use

SOON

Related products

Find the Right Solutions for Your Project Today

Let us share our expertise in advanced flooring, coating, waterproofing, and more. Complete your construction project proficiently with the use of superior solutions.

CALL NOW
Scroll to Top