POLYURETHANE PAINT – CLEAR
Polimaster 670 is a premium-grade, clear polyurethane protective coating designed for industrial floors, commercial concrete surfaces, epoxy-coated substrates, and wood furniture. This two-component, solvent-based polyurethane delivers a high-gloss, UV-stable, and non-yellowing finish that resists abrasion, chemicals, and weather exposure. It can be applied directly to concrete, over epoxy or polyurethane topcoats, or as a durable clear coating for interior and exterior wood.
Ideal for use in warehouses, showrooms, architectural projects, and furniture manufacturing, Polimaster 670 enhances surface clarity while providing long-term protection in demanding environments.
Clear polyurethane topcoat for industrial, commercial, and decorative protection.
• Durable high-gloss finish for concrete, epoxy, and wood
• UV-stable and non-yellowing for indoor and outdoor use
• Excellent abrasion and chemical resistance
• Ideal for warehouse floors, epoxy systems, and wood furniture
• Trusted clear coat solution for construction, manufacturing, and architectural applications
PROPERTIES
CHEMICAL RESISTANCE GUIDE
❗CAUTION: Mixed coating is moisture sensitive. Use water traps in all airlines. Moisture contact may reduce pot life and affect Gloss. Do not use mixed product beyond pot life.
1. Surface Preparation
Ensure surface is fully cured, clean, dry, and free of grease, dust, and contaminants.
For existing coatings (epoxy or polyurethane), lightly sand and clean before recoating.
2. Mixing
Mix Part A and Part B thoroughly in the prescribed ratio.
Stir mechanically for 3–5 minutes until fully blended.
Allow recommended induction time, if applicable.
3. Application
Apply using roller, brush, or airless spray.
Recommended application: 2 coats
Typical coverage: 8–10 m² per liter per coat, depending on substrate porosity and texture.
Recoat interval: 6–12 hours (temperature-dependent)
Light foot traffic: 24 hours
Full cure: 5–7 days
4. Clean-Up
Use polyurethane-compatible thinner or solvent for tool and equipment cleaning immediately after use.
Application: Industrial floors, warehouses, showrooms, decorative concrete
System Composition:
1. Surface Preparation:
– Ensure concrete is clean, dry, and free from contaminants
– Perform mechanical grinding or shot blasting for better adhesion
2. Base Option 1 – Direct Application:
– Polimaster 670 (2 coats)
Used directly on prepared concrete to enhance surface durability, stain resistance, and clarity
3. Base Option 2 – Over Epoxy Concrete Sealer:
– Apply Coatguard 116 Epoxy Sealer to prime and seal the surface
– Follow with Polimaster 670 (2 coats) as a clear protective layer
Provides improved chemical and abrasion resistance, especially in industrial settings
Application: Clear topcoat over existing colored epoxy or polyurethane finishes
System Composition:
1. Surface Preparation:
– Ensure the underlying topcoat (epoxy or polyurethane) is fully cured and lightly sanded if required
– Clean surface thoroughly to remove any debris or oils
2. Topcoat Application:
– Polimaster 670 (1–2 coats)
Acts as a transparent, UV-stable barrier
Adds gloss and enhances abrasion and chemical resistance over colored finishes
Application: Wooden furniture, cabinetry, wood panels
System Composition:
1. Surface Preparation:
– Sand wood to a smooth finish and remove all dust
– Ensure the surface is dry, clean, and free from waxes or oils
2. Optional Staining or Sealer (if desired):
– Apply wood stain or sealer if a tinted base or grain enhancement is needed
– Let it dry completely before applying polyurethane
3. Topcoat Application:
– Polimaster 670 (2 coats)
Provides a crystal-clear protective finish with high resistance to scratches, moisture, and wear
Ideal for both indoor furniture and decorative wooden elements
Clear polyurethane topcoat for industrial, commercial, and decorative protection.
• Durable high-gloss finish for concrete, epoxy, and wood
• UV-stable and non-yellowing for indoor and outdoor use
• Excellent abrasion and chemical resistance
• Ideal for warehouse floors, epoxy systems, and wood furniture
• Trusted clear coat solution for construction, manufacturing, and architectural applications
PROPERTIES
CHEMICAL RESISTANCE GUIDE
❗CAUTION: Mixed coating is moisture sensitive. Use water traps in all airlines. Moisture contact may reduce pot life and affect Gloss. Do not use mixed product beyond pot life.
1. Surface Preparation
Ensure surface is fully cured, clean, dry, and free of grease, dust, and contaminants.
For existing coatings (epoxy or polyurethane), lightly sand and clean before recoating.
2. Mixing
Mix Part A and Part B thoroughly in the prescribed ratio.
Stir mechanically for 3–5 minutes until fully blended.
Allow recommended induction time, if applicable.
3. Application
Apply using roller, brush, or airless spray.
Recommended application: 2 coats
Typical coverage: 8–10 m² per liter per coat, depending on substrate porosity and texture.
Recoat interval: 6–12 hours (temperature-dependent)
Light foot traffic: 24 hours
Full cure: 5–7 days
4. Clean-Up
Use polyurethane-compatible thinner or solvent for tool and equipment cleaning immediately after use.
Application: Industrial floors, warehouses, showrooms, decorative concrete
System Composition:
1. Surface Preparation:
– Ensure concrete is clean, dry, and free from contaminants
– Perform mechanical grinding or shot blasting for better adhesion
2. Base Option 1 – Direct Application:
– Polimaster 670 (2 coats)
Used directly on prepared concrete to enhance surface durability, stain resistance, and clarity
3. Base Option 2 – Over Epoxy Concrete Sealer:
– Apply Coatguard 116 Epoxy Sealer to prime and seal the surface
– Follow with Polimaster 670 (2 coats) as a clear protective layer
Provides improved chemical and abrasion resistance, especially in industrial settings
Application: Clear topcoat over existing colored epoxy or polyurethane finishes
System Composition:
1. Surface Preparation:
– Ensure the underlying topcoat (epoxy or polyurethane) is fully cured and lightly sanded if required
– Clean surface thoroughly to remove any debris or oils
2. Topcoat Application:
– Polimaster 670 (1–2 coats)
Acts as a transparent, UV-stable barrier
Adds gloss and enhances abrasion and chemical resistance over colored finishes
Application: Wooden furniture, cabinetry, wood panels
System Composition:
1. Surface Preparation:
– Sand wood to a smooth finish and remove all dust
– Ensure the surface is dry, clean, and free from waxes or oils
2. Optional Staining or Sealer (if desired):
– Apply wood stain or sealer if a tinted base or grain enhancement is needed
– Let it dry completely before applying polyurethane
3. Topcoat Application:
– Polimaster 670 (2 coats)
Provides a crystal-clear protective finish with high resistance to scratches, moisture, and wear
Ideal for both indoor furniture and decorative wooden elements
Let us share our expertise in advanced flooring, coating, waterproofing, and more. Complete your construction project proficiently with the use of superior solutions.
